Two post lift safty use

1, Before use, remove the equipment and debris near the lift that hinder operation, and check whether the operation handle is normal.

2, The safety mechanism is sensitive and effective, the hydraulic system is not allowed to creep.

3.When supporting the car, the four rubber pads should be on the same plane, and the height of the lifting arm rubber pad should be adjusted to contact the support part of the vehicle chassis.

4, When supporting the car, the vehicle can not be supported too high, and the last four brackets should be locked.

5.After the two post vehicle lift enters, the supporting arm of the lifting machine should be adjusted and moved to the lifting point specified by the vehicle.

6, Lifting personnel should leave the vehicle, lift to the required height, must be locked in the insurance, and ensure that the safety and reliability of the car bottom operation.

7.Except for subsistence allowance and minor repair items, other cumbersome and cumbersome operations shall not be repaired on the lift.

8.The lifter shall not take off or land frequently.

9,The support car lifting to be stable, slow landing.

10.It is strictly prohibited to lift the lift machine when someone is working.

11.If the safety mechanism is found to be ineffective, the wire rope is not synchronized, and the hydraulic part leaks oil, it should be reported for repair in time, and it should not be operated with illness.

12.After the operation, remove sundries and clean around the two post lifting machine to keep the site clean.

13.Periodically (half a year) eliminate water in the lifting oil cylinder, and check the oil quantity. If the oil quantity is insufficient, the same brand of pressure oil should be filled in time. At the same time should check lubrication, lift transmission parts such as pulley, wire rope, etc.